 |
Wire
Description:
- for the cutting out of bonded auto glass.
- alI types of cars where it is possible to use the wire.
:
|
 |
|
|
Piano wire:
- This wire is made of a very thin solid wire with a fine cutting capability.
Contents:
Article Number: R840016 (piano wire 10m.)
|
 |
|
|
Gold wire:
- This wire is made of three braided special wire
with considerable cutting capability.
Contents:
Article Number: R930017 (gold wire 22 m.)
|
 |
|
|
Four-edged wire:
- 4 edged wire in stainless steel, cuts the urethan, does not file it, thereby leaving a smooth finish which is immediately ready for the application of new urethan.
- Dim. 0,6 x 0,6 mm
Contents:
- Four-edged wire: 25 or 50 metres
|
Article Number |
length |
| R930018 |
25 m. |
| R930019 |
50m. |
|
 |
|
|
|
Wire holder
Description:
- practical holder for squared wire and cheese wire. This wire holder ensures that the
wire stays in position.
Contents:
- consists of 1 piece wire holder
Article Number: R910021 |
 |
|
|
Counter-holder and Wire handle
Description:
- is used as counterhold by use of all types of wire
Contents:
- consists of 1 piece counterhold R930117 and 1 piece wire handle R930184
Article Number: R930116 |
 |
|
|
Counter-holder with screw
Description:
- is used as counterhold by use of all types of wire
- the wire can be screwed or locked tight
Contents:
- consists of 1 piece counterhold
Article Number: R930117
|
 |
|
|
Self locking wire handles
Description:
- for fastening both ends of the cut out wire in order to obtain saw-strokes during the cutting phase.
- locks the wire, safely so that the wire does not slip or break
Contents:
- consists of 1 piece Self locking wire handle
Article Number: R930184 |
 |
|
|
Self locking wire handle with suction cup
Description:
- As R930184 but with a suction cup that makes
it possible for you to leave the handle safely on the screen, without
scratching the car, when you have to put the handle down to go to the
opposite side.
Content:
- consists of 1 piece Self locking wire handle
Article Number: R930184A |
 |
|
|
Wire handles - wood
Description:
- for fastening both ends of the cut out wire in order to obtain saw-strokes during the cutting phase.
- applies to all types of wires.
- manufactured in varnished beechwood.
Contents:
- consists of 1 piece wire handles
Article Number: R840017 |
 |
|
|
Wirestarter
Description:
- For piercing the wire through the polyurethane adhesive strip.
- Suitable for all types of wire.
- Manufactured in steel and aluminium.
Contents:
- consists of 1 piece wirestarter
Article Number: R930129
|
 |
|
|
Direct wire feeder - long
Description:
- for easy and flexible insertion of wire through the polyurethane.
Contents:
- consists of 1 piece Direct wire feeder - long
Article Number: R930181 |
 |
|
|
Direct wire feeder with T-handle
Description:
- for easy and flexible insertion of wire through the polyurethane.
Contents:
- consists of 1 piece Direct wire feeder with T-handle
Article Number: R930162 |
 |
