 |
Clip Removal Tool
Description:
-
for removel of clips or to door upholstery
removal
- Clip removal tool with a V-groove that is sharpend, so it easy will slip
under the head of the clips
Contents:
- consists of 1 piece Clip Removal
Tool
Article Number: R861012
|
 |
|
|
Wiper Arm RemoverDescription:
- detachment of the wiper arm from the cone axle after removal of the nut.
- for removing "rooted" wiper arms without damaging the scuttle plate.
Contents:
- consists of 1 piece Wiper Arm Remover
Article Number: R930016 |
 |
|
|
Trim Strip RemoverDescription:
- for the removal of trim strips on fully bonded auto glass where the strip can be detached for the clip by a "pull" upwards. E.g. Volvo, BMW etc.
- also as an auxiliary tool for the clip remover where the clip is to be detached before the strip can be removed with the trim strip remover.
Contents:
- consists of 1 piece trim strip remover
Article Number: R861011 |
 |
|
|
Clip Remover SetDescription:
- for the detachment of clips prior to the removal of trim strips on fully bonded auto glass.
- with the right and left tool parts for detachment of double clips which have barbs on both sides.
- all types of clips which are to be detached on a level with the glass, as e.g. Toyota, Mazda etc.
Contents:
- consists of 1 piece Right and 1 piece Left Clip Remover Set
Article Number: R861010 |
 |
|
|
Lifting Hook - short
Description:
- for all forms of working with glass mounted in rubber seals.
- for the situation where the mounting cord has not placed the gasket lip accurately in a corner. Then the general purpose tool is indispensable for placing the seal lip correctly.
Contents:
- consists of 1 piece Lifting Hook - short
Article Number: R840010 |
 |
|
|
General Purpose Tool - short 90 degrees
Description:
- where the mounting cord has not placed the gasket lip accurately in a
corner, the general purpose tool is indispensable for placing the seal lip
correctly.
Contents:
Article Number: R840018
|
 |
|
|
Ball-ended Hook - longDescription:
- for alI forms of work with glass mounted in rubber seals, but this tool is for jobs which require a blunt tool.
- with this long Ball-ended hook, you can also get in the front of the dashboard
Contents:
- consists of 1 piece Ball-ended Hook - long
Article Number: R840012
|
 |
|
|
|
Ball-ended Hook - Short
Description:
- for all forms of working with glass mounted in rubber seals.
- for the situation where the mounting cord has not placed the gasket lip accurately in a corner. Then the general purpose tool is indispensable for placing the seal lip correctly.
Contents:
- consists of 1 piece Lifting Hook - short
Article Number: R840011 |
 |
|
|
Lifting Hook – longDescription:
- for alI forms of working with glass mounted in rubber seals.
- for the situation where the mounting cord has not placed the gasket lip accurately in a corner below and behind the dashboard - With this tool you can get behind the dashboard and easily "angle" the seal lip into the correct position without removing the glass.
Contents:
consists of 1 piece Lifting Hook - long
Article Number: R840010A
|
 |
