|
Mouldingpres
Description:
Contents:
Article Number: R910056
|
|
|
Single
Suction Cup
Description:
- A pulling capability of
40 kg. per cup.
Contents:
- Consists of 1 piece of
Single Suction Cup
Article Number: R840051
|
|
|
Double
Suction Cups with tracks
Description:
- With tracks in the
centre, so the Tension Strap remains in position
- A pulling capability of
80 kg. per cup.
Contents:
- Consists of 1 piece
Double Suction Cups
Article Number: R840055
|
|
|
Single Suction Cup with Metal handle
Description:
For lifting and pull on curved glass.
Strong suction capability
With metal handle
Contents:
Article Number: R840053
|
|
|
Glass Pulling Tool - large model
Description:
To hold windscreens and rear windows in position during drying period.
Can also be used as a simple form of pressing tool.
The suction cups can be used on all flat surfaces and
Have a pulling capability of 80 kg. per cup.
Has moveable handles between suction cups that make it possible to fit windows with slight curvature.
Contents:
- Consists of of 2 double suction cups plus 2 tension straps with 4.5 m.
Article Number: R840070 |
|
|
Glass Pulling Tool - small model
Description:
- For holding bonded side windows in position in a simple and effective manner while bonding is curing.
- The suction cups can be made fast to all flat surfaces and have a pulling capability of 40 kg. per cup.
Contents:
- Consists of 2 single suction cups plus 1 tension strap 4.5 m.
Article Number: R840050 |
|
|
Tension Strap 4.5 m
Description:
- For R840050 and R840070
- Can be used for many purpose
Contents:
- Consists of 1 piece Tension Strap
Article Number: R840052 |
|
|
Universal Glass Pressing Tool - aluminium
Description:
- To hold polyurethane bonded auto glass in position during curing period.
- To press down butyl bonded auto glass.
- For both windscreens and rear windows of all types of cars.
- to ensure that the glass is pressed into the correct depth in the window flange.
- To avoid the glass rising out of the window flange during curing period. E.g. the rubber seal of the window may require a certain pressure down in the
window flange so the necessary depth is achieved.
- To press the butyl band, so the max. bonding width is obtained for holding the glass.
- With its 8 adjustable suction cups it can be fitted to all glass shapes and sizes.
- With its removeable and adjustable side fasteners it can be fitted to all types of cars.
- The frame is constructed of square section aluminium
Contents:
- Consists of 1 piece complete Universal Glass Pressing Tool - aluminium
Article Number: R840040 |
|